HA-3000 adapter

The base of this adapter is made up of an HA-2500 adapter that has improved some features. The input signal passes through a low-noise amplifier that has a fixed gain in six steps (see Technical Parameters). It is suitable for all vehicles with an electronic output. The input signal ratio (1: 1, 1: 2, 1: 4, 1: 8 and 2: 1 multiplier) can be set in the adapter.

Use tachograph, etc.

The two output signals from the adapter are phase shifted by 180 ° (open collector).

Using an electronic taximeter, etc .:

Two rectangular output signals from the adapter are phase shifted 180 °.

Technical parameters:

Supply voltage 6 - 16V or tachograph, ie idle 8V

Input signal level 1: 250mVss degree 4: 1Vss

(More than) Stage 2: 300mVss Step 5: 2Vss

Stage 3: 600mVss stage 6: 4Vss

Offset is automatically set

Input frequency 0.1 Hz - 1500 Hz

Output signal OC, NOC open collector corresponding to the required input signal for electronic tachographs (two signals phase-shifted by 180 °),

Adjustable split ratio (1: 1, 1: 2, 1: 4, 1: 8) or multiplier (2: 1)

OUT, NOUT rectangular bipolar corresponding to the required input signal for electronic taximeters and other el. Systems, adjustable split ratio (1: 1, 1: 2, 1: 4, 1: 8) or multiplier (2:

Maximum 15 mA

Climatic resistance -40 to +85 ° C

Relative Humidity 0 - 90%

Resistance to vibration resists vibration 5g according to